background image

2

©2022 MAGMATIC EFFECTS all rights reserved. Information, specifications, diagrams, images, and 
instructions herein are subject to change without notice. 

MAGMATIC EFFECTS logo and identifying 

product names and numbers herein are trademarks of 

MAGMATIC EFFECTS. Copyright protection 

claimed includes all forms and matters of copyrightable materials and information now allowed by 
statutory or judicial law or hereinafter granted. Product names used in this document may be 
trademarks or registered trademarks of their respective companies and are hereby acknowledged. All 
non-MAGMATIC brands and product names are trademarks or registered trademarks of their respec-
tive companies.
MAGMATIC EFFECTS and all affiliated companies hereby disclaim any and all liabilities for property, 
equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic 
loss associated with the use or reliance of any information contained within this document, and/or as a 
result of the improper, unsafe, insufficient and negligent assembly, installation, rigging, and operation 
of this product.

Due to additional product features and/or enhancements, an updated version of this document 

may be available online. 

Please check 

www.elationlighting.com 

 for the latest revision/update of this manual before 

beginning installation and/or programming.

MAGMATIC EFFECTS | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 | 323-832-9142 fax | 

www.elationlighting.com

 | 

sales@magmaticeffects.com

Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 | +31 45 546 85 96 fax | 

www.elationlighting.eu

 | 

info@elationlighting.eu

Elation Professional Mexico | AC Santa Ana 30 | Parque Industrial Lerma, Lerma, Mexico 52000
+52 (728) 282-7070

Date

Document 

Version

Software 

Version DMX Channel Mode Notes

09/30/20

1.0

1.0

1 / 3 Channels

Initial Release

12/15/20

2.0

1.0

1 / 3 Channels

Updated Dimensional Drawings & Specifica-
tions

06/06/22

3.0

1.0

1 / 3 Channels

Updated System Menu

Summary of Contents for THERMA TOUR 800























Reviews: