background image

7

SAFETY GUIDELINES

This fixture is a sophisticated piece of electronic equipment. To guarantee smooth operation, it is 
important to follow all instructions and guidelines in this manual. Magmatic Effects is not responsible 
for injury and/or damages resulting from the misuse of this fixture due to the disregard of the informa-
tion printed in this manual. Only qualified and/or certified personnel should perform installation of this 
fixture and only the original rigging parts included with this fixture should be used for installation. Any 
modifications to the fixture and/or the included mounting hardware will void the original manufac-
turer’s warranty and increase the risk of damage and/or personal injury.

PROTECTION CLASS 1 - FIXTURE MUST BE PROPERLY GROUNDED.

THERE ARE NO USER SERVICEABLE PARTS INSIDE THIS UNIT. DO 

NOT ATTEMPT ANY REPAIRS YOURSELF. DOING SO WILL VOID 

YOUR MANUFACTURER’S WARRANTY. DAMAGES RESULTING FROM 

MODIFICATIONS TO THIS DEVICE AND/OR THE DISREGARD OF 

SAFETY INSTRUCTIONS AND GUIDELINES IN THIS MANUAL VOID THE 

MANUFACTURER’S WARRANTY AND ARE NOT SUBJECT TO ANY WARRANTY 

DO NOT PLUG THIS UNIT INTO A DIMMER PACK

DO NOT REMOVE THE COVER UNDER ANY CONDITIONS

KEEP UNIT IN AN UPRIGHT POSITION

NEVER OPERATE THIS UNIT WITH THE COVER REMOVED

UNPLUG FROM POWER DURING LONG PERIODS OF NON-USE

ENSURE TANK IS EMPTY BEFORE STORAGE OR TRANSPORT

DO NOT MOVE WHEN FILLED WITH FLUID

DISCONNECT POWER BEFORE ADDING FLUID OR PERFORMING 

MAINTENANCE

FOR USE IN INDOOR / DRY LOCATIONS ONLY

DO NOT EXPOSE DEVICE TO RAIN AND/OR MOISTURE

PLACE UNIT IN A WELL VENTILATED AREA

ALLOW 40” (100CM) ABOVE AND AROUND THE UNIT FOR PROPER 

VENTILATION.

Summary of Contents for THERMA TOUR 800























Reviews: