BLUEPIRAT MINI | USER MANUAL /
page 31 of 62
Note:
Digital IN and Analog IN are combined to one wire at BLUEPIRAT Mini. Please connect
the ground for Analog IN when you use an external push button.
10.2
Time stamp
Usually the recorded messages will get a time stamp at the end of each received message. The
time stamp is included on most interfaces at the end of the message. Only for the serial inter-
face (RS232) the start of the transfer will be used as timestamp.
Trace Data
Accuracy
Start
End
MOST25
1 µs
x
MOST150
1 µs
x
ECL
1 µs
x
CAN
1 µs
x
LIN
1 µs
x
FlexRay
1 µs
x
Ethernet
100 ms
x
RS232
1 ms
x
Table 10.1: Accuracy of marker