BLUEPIRAT RAPID | USER MANUAL/
page 15 of 67
6.2
USB 3.0 interfaces
The BLUEPIRAT rapid offers two front USB 3.0 ports in host-mode.
They can be used for connecting a GPS, mobile phone or Wi-Fi module to the logger. Wi-Fi can
be used to get access to the logger over the client or to use the feature
Live View
.
The data loggers also support logging data from units, which communicate over
Android Log-
Cat interface
via USB.
Figure 6.3: BLUEPIRAT Rapid
– USB 3.0 interfaces
6.3
10 Gbit/s ETH interfaces / TSL connectors
The network connectors
ETH #1 / TSL
and
ETH #2 / TSL
at the front side are for the communi-
cation between the data logger and the system client and can be used as well for data logging.
Additionally, the ports are used to connect further devices via Ethernet to form a TSL network
(System Link) and to synchronize their time.
Figure 6.4: BLUEPIRAT Rapid
– 10 Gbit/s ETH interfaces
