BLUEPIRAT RAPID | USER MANUAL/
page 18 of 67
7
Interfaces at the rear side
Figure 7.1: BLUEPIRAT Rapid rear side
Attention:
The data logger is protected against reverse polarity of the power supply. Nevertheless,
devices connected to the data logger can be damaged if the data logger is connected
with the wrong polarity.
7.1
100Base-T1 / Broad-R-Reach® / Automotive Ethernet
BLUEPIRAT Rapid has at his rear side 20 100Base-T1 ports for logging. The ports are de-
signed to forward all signals from one port to the next one, e.g. Port #1
Port #2. Please find
further descriptions about the settings in the manual of the System Client, where you find draw-
ings about the functionality too:
Figure 7.2: 100Base-T1 / Automotive Ethernet / Broad-R-Reach connectors
