BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 36 of 93
7
Configuring the network camera AXIS P12xx
7.1
Connecting the network camera AXIS P1204 / P1214 /
P1224
Connect the camera with the associated main unit. Connect the power supply to the main unit.
Connect your PC or laptop via Ethernet cable to the main unit. Turn on the power supply. All
LEDs should light green after about 60 seconds.
Network camera AXIS P1204 / P1214 / P1224
Change your PCs IP configuration. Use static IP address with the following settings:
Figure 7.1: Setting a static IP address
Power supply (acc. AXIS
spec.)
PC / Laptop