BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 59 of 93
9.4
Setting date and time
Change to the entry
[Basic Setup]
[3. Date & Time]
(9)
. Choose the <Time mode>
(o) Set
manually
(10)
. Set up date and time. Confirm the settings with
[Save]
(11)
.
Comment:
The time set here is initially only a temporary adjustment. In our system the data logger
is the time master and overwrites the logger time after successfully synchronizing with
the video server.
Figure 9.8: Set date and time manually
You can also display date and time on the video image.
Attention:
Before you start recording always set the date and time in the data logger first.
It is impossible to change the timestamp at recorded video data. This means, the setup of
a new logger time before downloading does not change the time within the video pic-
tures. In this case, the timestamps of the other channels and the video picture timestamp
could not match.
Click
[Basic Setup]
[4 Video Stream]
(6)
. <------ Unterschied zu deutscher Version. Activate
both checkboxes
Include date
and
Include time
(7)
to activate the display on the video image.
Confirm the settings with
[Save]
(9)
.
If desired, change format options like <Text color>, <Text background color> and text place
(8)
.
Confirm the settings with
[Save]
(9)
.
