BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 71 of 93
11
Save and restore the Video Encoder settings
To save all settings of the AXIS video server you can use the
program “AXIS Camera Manage-
ment”, which can be downloaded on the website of AXIS (registration required).
Needed software:
AXIS Camera Management v2.00.31
http://www.axis.com/techsup/software/index.htm
or
http://www.axis.com/de/products/cam_mgmt_software/interface.htm
Attention:
If you use a newer version of the program it may be that the communication between
software client and data logger is disturbed. That is because the program changes some
network settings, so UDP pings are not correctly transferred from the logger to the AXIS
Camera Management Client.
In this case the older version (mentioned above) should be used or the program should
be uninstalled after the saving.
After installing the software you can start it by using
[Start]
[AXIS Camera Management]
[AXIS Camera Management Client]
.
Figure 11.1: AXIS Camera Management Client
You can add your device by clicking
[Add devices]
.
Figure 11.2: Adding devices step 1
After selecting your device and logging in with your chosen password
for the user “root” from
before you add the device to the device list with
[Next >]
and
[Finish]
in the next window.
