blue PiraT Mini
User Guide
Datum: 21.09.2016
Seite 38 von 56
blue_PiraT_Mini_UserManual_V2.4.1.doc
11.7.1.3
Raw
When using the raw data transmission over TCP the blue PiraT Mini will be a TCP slave device.
Therefore the blue PiraT Mini will initiate a TCP connection to a TCP server by using an open
socket connection (you can configure IP/Port of server via client software).
When using raw data transmission, every data package up to 40 Kbytes is getting a time stamp
and will be written on the logger.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for
logging data again.
11.7.1.4
UDPServer
The blue PiraT Mini can be configured as a UDP server by setting up an IP address and port
number.
There is an adjustable timeout. The connection will be terminated if no data arrives. This ap-
pears as a message in the trace file. There is no configurable debug level. The blue PiraT Mini
as a UDP server accepts UDP data packets, UDP multicast and UDP broadcast packets.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for
logging data again.
11.7.1.5
TCPServer
The blue PiraT Mini can be configured as a TCP server by setting up an IP address and port
number.
There is an adjustable timeout. The connection will be terminated if no data arrives. This ap-
pears as a message in the trace file. There is no configurable debug level. The blue PiraT Mini
as a TCP server accepts TCP data packets, TCP multicast and TCP broadcast packets.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for
logging data again.
11.7.1.6
SpyMode
By using the Ethernet Spy mode it is possible to log all Ethernet data (promiscuous mode).
More information can be found in the
Telemotive System Client User Guide
.
11.7.1.7
EsoTrace
By using the EsoTrace mode it is possible to log data in the EsoTrace protocol.
More information can be found in the
Telemotive System Client User Guide
.
11.7.1.8
Camera (license required)
If you use a camera license on the data logger, it is possible to connect up to four Ethernet
webcams to the blue PiraT Mini. After connecting the blue PiraT Mini is able to log MPEG4 vid-
eo streams.
More information can be found in the
Camera User Guide
.
11.7.1.9
DLT (license required)
If you use a DLT license on the data logger, it is possible to connect up to 16 ECU for logging
their DLT messages.
More information can be found in the
DLT-logging User Guide
.
