blue PiraT Mini
User Guide
Datum: 21.09.2016
Seite 42 von 56
blue_PiraT_Mini_UserManual_V2.4.1.doc
Three pins with the names clamp 30 and clamp 31 are interconnected for the voltage supply of
the data logger.
Caution:
A short circuit between the clamp 30 and clamp 31 on the plug
may lead to the destruction of the data logger.
The maximum value of the power supply must not exceed 30 V. In case of overvoltage the de-
vice can be destroyed and will void the warranty.
Mounting
The data logger has to be fixed in laboratory setups and especially in automobiles, so that it is
secured against falling, slipping and skidding around.
Positioning of the antenna
During operation of the data logger in an automobile the antennas which are connected to the
data logger must not be located outside the vehicle.
Mechanical action
++++++++++++++ Operation envir+++++++++++++
Height: - 300 to 5500 m
Shock at 2 ms half sinusoidal wave
300 G
Vibration sinusoidal wave
3 G (10
– 50 Hz)
2.5 G (50
– 2000 Hz)
2 G (200
– 5000 Hz)
++++++++++++++ Out of operation envir+++++++++++++
Height: - 300 to 12000 m
Shock at 1 ms half sinusoidal wave
800 G
Vibration sinusoidal wave
up to 5 G (10 - 500 Hz)