blue PiraT Mini
User Guide
Datum: 21.09.2016
Seite 30 von 56
blue_PiraT_Mini_UserManual_V2.4.1.doc
10.4 Memory space and level
About the ring buffer and other options, such as the protection of areas around markers, the
characteristics of the logger can be configured what to do, when the internal memory is full.
The following status messages can occur during operation of the data logger. It will also be dis-
played on the optional Remote Control (RC) / Remote Control Voice (RCV).
10.4.1
Status Logger: OK
Everything is OK
On the internal memory is enough free space to record all incoming data.
blue PiraT Mini
STATE-LED is off.
RCV
Table 10.3: Status Logger: OK
10.4.2
Status Logger: WARN
Warning, which does not affect the data recording
10.4.3
Status Logger: RING
Memory is full, buffer mode is active
The buffer is active and the storage filled more than 95 %. Older data will be deleted to save
space for newer data.
blue PiraT Mini
STATE-LED is off.
RCV
Line three shows the level of the ring buffer on the
internal memory.
Table 10.4: Status Logger: RING
