blue PiraT Mini
User Guide
Datum: 21.09.2016
Seite 7 von 56
blue_PiraT_Mini_UserManual_V2.4.1.doc
4
System requirements
Control Unit
A Windows based Laptop or PC is needed to configure the devices of Telemotive AG by
Telemotive System Client
. It also allows to save the recorded data and to use them offline
later.
Telemotive System Client
The software client is used for configuring the data logger as well as downloading the recorded
data or convert these into your needed file format. An firmware update can be performed by the
Telemotive System Client
too to ensure that your devices are always up to date.
blue PiraT Mini
The communication between bus systems and control units is monitored and relevant data can
be recorded very precisely with the data logger of Telemotive AG. The collected data are stored
to the logger and can be downloaded via Ethernet to a PC.
The
blue PiraT Mini
is smallest data logger in the world with an outstanding functional scope. It
offers a wide range of interfaces, stable temperature behavior, very low energy consumption,
four GBit Ethernet ports, and much more. Different blue PiraT Mini can be flexibly expanded to
one cluster and therefore handled very easily by using
License
For some additional features an installed license is required. Settings for licensed features can
be performed with a valid license only.
If you need a license for your logger, please contact our sales department (please find the ad-
dress under contact at the last page).
