EN 07
Repeat these steps two or three times, to get rid of the scale completely.
After completion, the water tank and device need to be cleaned.
Remove the water tank cover
6
and fill the water tank
7
with clean water or remove the water tank from the
device, remove the water tank cover
6
and fill the water tank
7
with clean water.
Dispense the water until the tank is empty.
Repeat these steps two or three times, each time with new fresh water, before you consume the dispensed
water.
Cleaning and maintenance
• Remove the plug from the mains power and allow the device to cool down fully.
• Never immerse the device in water or any other liquid.
• Clean the device after each use.
• Clean the casing and insides with a damp cloth.
• Do not use any washing up liquids in the water tank!
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool, these damage the
device.
• Dry the device thoroughly.
• Store the device in a dry place.
5) TROUBLESHOOTING
5) TROUBLESHOOTING
Display shows E7
Lack of water
Fill water in water tank up to the MAX mark
Display shows E2,E5
Temperature sensor of the water
inlet has a problem
Send the device to the service centre to check
or replace the temperature sensor
Display shows E1,E4
Temperature sensor of the water
outlet has a problem
Send the machine to the service centre to
check or replace the temperature sensor
No display or non-heating
Thermostat cut-off
Use the reset key to press the reset button
and recover the device
Water Leakage
Drainage stopper is loosened
Tighten the drainage stopper on the bottom
6) SPECIFICATIONS
6) SPECIFICATIONS
• Voltage input: 220 – 240 V~, 50/60 Hz, Class I
• Power: 2200 – 2600 W
• Temperature range: 45 - 100 °C
• Tank capacity: 4 l
• Dimensions: 33.7 x 19 x 29 cm (H x W x D)
• Weight: 3.34 kg
7) STORAGE & TRANSPORTATION
7) STORAGE & TRANSPORTATION
• When storing the device, it should first be cleaned in accordance with this user manual. The device should be
stored in its original packaging.
• Always store the device in a dry and well-ventilated room and beyond the reach of children.
• Protect the device against vibrations and shocks during transport.
All contents and specifications mentioned in this manual are subject to change without prior notice.
Your product has been manufactured using high quality materials and components
which can be recycled and used again. At the end of its life span, this product cannot be
disposed of in normal domestic waste, but must be taken to a special collection point for
recycling electrical and electronic equipment. This is indicated in the user manual and in
the packaging by the waste container marked with a cross symbol. Used raw materials
are suitable for recycling.
By recycling used appliances or raw materials, you are playing an important role in protecting our
environment. You can ask your local council about the location of your nearest collection point.
INSTRUCTIONS FOR PROTECTING THE ENVIRONMENT
(WEEE
, the waste electrical and electronic equipment directive)
Summary of Contents for MI-HA-IHWD02-CB
Page 1: ...USER MANUAL Model MI HA IHWD02 CB...
Page 2: ......
Page 35: ......
Page 36: ...Version 2021 04 20...