ALARM OFF
DC 5V 1.0A
USB CHARGING
DC 5V 1.5A
PRESETS
MIN
HR
SLEEP
ON/OFF
180º FLIP
FM ON/OFF
ALARM OFF
DC 5V 1.0A
USB CHARGING
DC 5V 1.5A
PRESETS
MIN
HR
SLEEP
ON/OFF
180º FLIP
TIME SET
Y-M-D
FM ON/OFF
4. Close the battery compartment and
tighten the screw to secure the battery
panel.
Note:
The Date, Time, and Alarm settings
will need to be set again once connected
to power
.
2. Remove the battery compartment panel.
3. Remove and recycle the depleted
battery. Replace with a new 3V, CR2032
Flat Lithium battery.
If your clock does not save settings after a power outage the backup
battery may need to be replaced. Remove power by unplugging the clock
and follow the below steps to replace the 3V, CR2032 Flat Lithium battery.
REPLACING THE BATTERY
ALARM OFF
DC 5V 1.0A
USB CHARGING
DC 5V 1.5A
PRESETS
MIN
HR
SLEEP
ON/OFF
180º FLIP
FM ON/OFF
1. Loosen the screw using a small Phillips
Head screwdriver. Note: The screw is
designed to be held by the battery
panel and cannot be fully removed
from the panel.
Note:
The screw is designed to be held
by the battery panel and cannot be
fully removed from the panel
.
18