Page 7
c. Press the ENTER or PLAY button to enter a menu you have selected or start an action you have
selected.
d. During DVD disc playback, press the MENU button to return to Root menu. As for SVCD or
VCD2.0 discs (with PBC function turned on), press PBC button to return to the menu.
e. Press the STOP button to stop playback.
•
When you press STOP button for the first time, the player
goes into PRE STOP state. At the same time, the OSD (On
Screen Display – DVD functions displayed on the TV
screen) will show “Press Play Key To Continue”. Press the
STOP button twice to enter into STOP state.
•
In PRE STOP state, the player remembers where playback was stopped. Pressing the PLAY
button will cause the player to commence playback from the point at which you previously
stopped. Note that this function is cancelled if you turn off the players power or if you open the
disc tray at any point.
•
In STOP state, when you press PLAY button, the player will start playback from the beginning
of the disc.
B) TITLE MENU (Compatible with DVD discs only)
a) During DVD playback, press TITLE button to display the DVD title content.
b) Press the
◄
►▲▼
buttons to highlight the title you want to select and press ENTER button to
confirm your choice. You can also press NUMERICAL buttons to choose a title.
c) The DVD player begins at chapter 1 of the chosen title.
C) SEQUENCE PLAYBACK
a) When a SVCD or VCD2.0 disc is loaded and the PBC button has been pressed, the PBC function
is turned on. When the PBC button is pressed again, the PBC function is switched off. When the
PBC function is off, the player plays the discs in sequence playback mode. When PBC function is
button is pressed twice, PBC is switched on.
b) Except for SVCD of VCD disc, in the STOP state, when press PLAY button, the player will enter
the sequence playback mode. This feature is effective to all the compatible discs.
D) PROGRAMMED PLAYBACK
The Programmed playback option allows you to enter the order in which you want chapters or tracks
to play, up to a maximum of 16. Press the PROG button to enter the programmed playback menu.
•
The programmed playback menu for DVD discs looks
like the screen image to the right. Note that ‘Tt’ stands
for Title and ‘ch’ stands for Chapter. Both the Title and
the Chapter number need to be entered for an entry to
be valid.
