- 7 -
OPERATION
SLEEP FUNCTION
During radio on mode, press Snooze / Sleep / Nap button (13) to turn on sleep
mode, the sleep time will keep flashing by 10 seconds, within 10 seconds and
press sleep button can change the duration from 90 min – 15 min. Press on/
off button (12) to cancel sleep function.
NAP timer function (countdown timer)
During radio off mode, press snooze / sleep / NAP button (13) to turn on NAP
mode, the NAP time will keep flashing by 10 seconds, within 10 seconds
and press snooze / sleep / NAP (13) button can change the duration from
90 min – 10 min. The alarm buzzer will sound for 30 min and then shut off
automatically. To stop the alarm buzzer, press the on/off button (12).
Press the snooze / sleep / NAP (13) button has no effect during alarm
operation. Press on/off button (12) to cancel NAP function.
The radio OFF mode, select the display light Auto off / low / high dimmer (21)
to the on/off mode, the LED display will automatically off in 15 seconds. Press
any key button to turn the display on.
RADIO OPERATION
• Press the on/off button (12) to turn radio on.
• Select AM/FM band press the AM/FM band button (11).
• Select the station using the Tuning knob (8).
• Turn the volume knob (7) to adjust volume as required.
• Press the on/off button (12) to turn radio off.
Note : The AM band use an internal directional aerial, rotate the radio
for best reception. Ensure that the FM antenna (23) is completely
unrolled and extended for best FM reception.
RESET
The reset button (20) is located on the back of unit. Use a ballpoint pen to
press it whenever you change the batteries, or unit is not performing as
expected. This will return all settings to default value, you will lose any stored
data (alarm and clock settings).
