•
SET: Selects the cleaning cycle time. When unit is turned on, the default
time is set to 180 seconds.
•
Choose the cleaning cycle time according to the severity of cleaning
needed (180s, 280s, 380s, 480s, 90s).
•
ON button: Starts the cleaning cycle. The red light indicates that the
cleaning cycle has started. Time remaining is displayed on the digital
screen.
•
OFF button: Stops/pauses cleaning.
•
ON button: Resumes cleaning.
•
When display shows 000, the unit stops automatically and the red light
will turn off.
•
Repeat above steps for additional cleaning.
•
Lift the lid and remove item(s). Use a soft, non-abrasive cloth to dry
item(s) and remove any loose dirt.
•
Unplug the unit when the cleaning cycle is complete.
•
Pour the water out and wipe down with a dry cloth.
•
Unplug and empty the unit after using.
•
Do not keep water in tank after use.
•
Wipe the tank and unit with a dry cloth.
•
To reduce risk of electrocution, do not clean entire unit with water.
•
Store in cool, dry place that is not accessible by children.
ATTENTION: This appliance has a polarized plug (one blade is wider than the other). As a
safety feature, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat this safety feature.
UNIT MAINTENANCE
OPERATION
2
1
- 7 -
