9
:
S-VIDEO input, connect video input from external device here
:
Antenna input, connect antenna connector or aerial interface here
to receive cable / aerial signal
Installing the Battery
-
Remote Control Battery Information
The remote control requires a single CR2025 3V Lithium cell battery. The battery is already installed
in the remote control. All you need to do is pull the plastic tab from under the terminals.
Now the remote control is ready to use.
-
Changing the Battery
If the battery needs to be changed, turn the remote control over, push the catch on the battery holder
down and slide it free as shown in the diagram below.
Remove the battery and replace it with a new one, noting the polarity markings on the battery holder.
Dispose of the old battery in accordance with your local authorities guidelines. Do not put it into
your household waste and don’t burn it.
Remote Control Illustration
6- Remote Control Overview
Summary of Contents for MLD1525
Page 3: ...1 Important Information ...
Page 16: ...16 ...
