Magnasonic MLD1525, Instruction Manual

12

C) Connect to external AV devices

(

VCR’s & DVD Recorders

)

using

Composite and S-Video inputs

Connection steps

:

Read the user guide supplied with your AV device and ensure that it has Composite or S-Video

connectors

Make sure that the power of the LCD-TV and the AV device are off

Connect a Composite video cable (supplied) to the yellow Composite video connector 

input

 on the 

back of the LCD TV. Now insert the other end of the composite cable into the yellow Composite

connector

output

 on the AV device

Alternatively connect a S-video cable (not supplied, provides better image quality) to the S-Video

connector on the back of the LCD TV. Now insert the other end of the S-Video cable into the

S-Video connector on the AV device

Connect the RCA audio cables (white and red connectors) from the AV devices’ RCA audio

output

 connectors to the RCA audio 

input

 connectors on the back of the LCD-TV

Connect an an antenna cable (CATV) to the corresponding interface connector (75 O ANT) on the 

back of the LCD-TV. Connect the other end of the antenna cable to the antenna 

output

connector

on the VCR or DVD recorder. Now you are able to view and record a TV signal at the same time

Turn on the power of the LCD-TV first, and then turn on the power of the AV device

Press the Input button to set the video input mode of the LCD-TV to “AUX” if you used a

Composite video cable to make the connection. Press the Input button to set the video input mode 

of the LCD-TV to “S-Video” if you used a S-Video video cable to make the connection. 

D) Connect to a TV signal

Connection steps

:

Make sure that the power of the LCD-TV is off

Connect an antenna cable (CATV) to the corresponding interface connector (75 O ANT) on the

back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the

wall or on your digital cable / satellite receiver. Now you are able to view regular cable TV

If you use an aerial (external antenna) to receive TV signals, insert the aerial connector to the

antenna connector (75 O ANT) on the back of the LCD TV. Note that you might require an adapter 

(not supplied) to be able to connect to the antenna connector on the back of this LCD TV. Consult 

your local electronics retailer to determine the type of adaptor you might need 

Turn on the power of the LCD-TV

Press the Input button to set the video input mode of the LCD-TV to “ TV mode”. The channel

number appears in the top left side of the screen

Make sure the antenna is connected to the wall outlet or cable / satellite receiver. Press the Menu 

button twice to enter the Tuning menu and select “ Auto Tuning “

The LCD-TV will search for all available channels and memorize them

You can use the PRO

/ PRO

buttons or the number keys on the remote control to select the 

channel you want to watch