Magnasonic SB41, User Manual

6

First Time Set-up

First-time Use of Remote Control

The remote control has a pre-installed lithium CR2025 battery. Remove the protective tab to activate 
the remote control battery. 

Replacing the Remote Control Battery

Note: The remote control requires a CR2025, 3V Lithium battery.

1. 

Push the tab on the side of the battery tray towards the tray.

2. 

Slide the battery tray out of the remote control. 

3. 

Remove the old battery. Place a new CR2025 battery into the battery 
tray with the correct polarity (+/-) as indicated.

4. 

Slide the battery tray back into the slot in the remote control. 

 
Battery Precautions

• 

When the remote control is not to be used for a long time (more than a month), remove the 
battery from the remote control to prevent it from leaking.

• 

If the battery is leaking, wipe away the leakage inside the battery compartment and replace the 
batteries with new ones.

• 

Do not use any batteries other than those specified.

• 

Do not heat or disassemble the battery.

• 

Never throw the battery in fire or water.

• 

Do not carry or store batteries with other metallic objects. Doing so could cause batteries to 
short circuit, leak or explode. 

• 

Never recharge a battery unless it is confirmed to be rechargeable type. 

Placing a TV or Monitor on Soundbase

This soundbase supports a TV up to a maximum dimension of 18.9 
(W ) x 8.7 (D) inches for its base and within a maximum load of 110 
lbs (50 kg)

CAUTION: This soundbase is not suitable for use with TVs that do 
not have a base stand. 

1

2

4

3

1

2

4

3