Magnasonic SB41, User Manual

8

Pairing Your Device via Bluetooth

The operational range between the soundbase and a Bluetooth enable device is approximately 8 
meters/26 feet. Any obstacle between this unit and a Bluetooth device can reduce operational range. 
Compatibility with all Bluetooth devices is not guaranteed. Please keep this unit away from other 
electronic devices that may cause interference.  
     
1. 

When the soundbase is powered on, press the SOURCE button on the unit until the LED indicator 
is blue or press the     button on the remote control. 

2. 

Activate Bluetooth on your device and select the search mode. “Magnasonic SB41” will appear on 
your Bluetooth device. You may need to enter “0000” if prompted to enter a password.

3. 

If your device cannot find the unit, press and hold the  

  button on the remote control for 3 

seconds. The soundbase has now entered pairing mode. The LED indicator will flash blue quickly. 

4. 

Select “Magnasonic SB41” in the pairing list. After the sound prompt, the system is successfully 
connected and the Blue LED indicator will stop flashing and remain lit. 

5. 

You can now play music from your connected device. 

6. 

Ensure the volume is turned up on your connected device.

7. 

You can use the remote control to play or skip tracks. Press the  

  button to pause/play  

and the  

  to change tracks. 

Disconnecting Your Device from Bluetooth 

There are three ways to disconnect from Bluetooth. 

1. 

Change the audio source on the soundbase by pressing the SOURCE button on the unit itself 
or press either AUX, USB or HDMI ARC buttons on the remote control. 

2. 

Disable Bluetooth directly on your connected device. The Bluetooth device will be disconnected 
from the soundbase once you hear the sound prompt. 

3. 

Press and hold the  

  button on the remote control for 3 seconds. 

Using AUX

Change the audio source on the soundbase by pressing the SOURCE button on the unit until the LED 
indicator is green or press the AUX  button on the remote control. There are two ways to play audio 
using AUX.

 
Option A:

Use a 3.5mm to 3.5mm audio cable (not included) to correct an external audio device or TV’s 
headphone input to the AUX input on the unit.

Option B:

Use a 3.5mm AUX to RCA audio cable (included) to connect the TV’s audio output (R/L) inputs to the 
AUX input on the unit. 

TV

B

A