Magnasonic SB41, User Manual

9

Using USB Playback 

You can use a USB stick to playback your favorite MP3 files. 

1. 

Insert the USB stick into the USB port on the back of the unit. 

2. 

Press the SOURCE button on the unit until the LED indicator is orange or 
press the USB button on the remote control to select USB mode.

3. 

To pause or resume play, press the  

  button on the remote control

4. 

To skip to previous or next song, press the  

  and  

 buttons on the 

remote control. 

 
Note: USB playback is only for use with a USB stick (up to 32GB). 

Standby and ON Modes

When you first connect the soundbase to the power outlet, the unit will be in standby mode.  

1. 

Press the  

  button on the unit or on the remote control to switch the unit ON. Note: If a TV or 

external device (only for AUX socket) is connected, the unit will switch on automatically when 
the TV or external device is switched on. 

2. 

Press the  

  button again on the unit or the remote control to switch the unit back to standby 

mode. The power LED indicator will light up red and turn off after 10 seconds. Note: When the 
unit has no input signal for over 15 minutes, it will automatically switch to standby mode. 

3. 

To completely turn OFF the unit, unplug the power cable from the power outlet on the wall. 

Selecting Modes 

1. 

Press the SOURCE button repeatedly on the unit or press the AUX,   (Bluetooth), HDMI ARC, or 
USB buttons on the remote control to select the desired mode. 

2. 

The LED indicator light on the front of the unit will show which mode is currently in use. 

• 

Green indicator: AUX

• 

Blue indicator: Bluetooth 

Adjusting the Volume 

1. 

Press the VOL +/- buttons to adjust the volume either on the unit itself or on the remote control. 

2. 

If you wish to mute the sound, press the     button on the remote control. To unmute the 
sound, press the     button again or press the VOL +/- buttons. 

Note: While adjusting the volume, the status LED indicator will flash quickly. When the volume has hit 
maximum level, the status LED indicator will flash red once. 

 
Changing EQ (Equalizer) Effect

While playing audio, press the VOCAL, MOVIE, MUSIC buttons on the remote control to select preset 
equalizers. The LED indicator light will change colors according to the EQ chosen.

• 

VOCAL: Green light flash

• 

MOVIE: Blue light flash

• 

Orange indicator: USB

• 

White indicator: HDMI ARC 

• 

MUSIC: Orange light flash 

• 

EQ OFF: White light flash