16
1.2 Rear
DC IN
AUX IN
WLAN
SET
OFF
AUX
LAN
TV
Desktop
MP3/
Smart phone
DC IN
•
SET ( RESET/ WPS Mode): Press briefly to activate WPS mode; press and hold for about 5 sec. to
restore the speaker to the factory settings.
•
DC IN : Socket for mains power adapter. Connect the power adapter to power on the system
automatically.
•
AUX-IN: Audio input, 3.5mm stereo socket
•
Battery ON/ OFF: When operating w/o a power adaptor, switch OFF to save the battery power and
switch ON to power on the system.
•
LAN: Ethernet LAN connection to connect your speaker to a LAN port of a router instead of WLAN
network.
1.3 LED Status
Button/LED
Display
Status
STANDBY
Lights up Red
Standby mode after 15mins w/o any audio signal
inputs
Battery Low Power
Flashes red
Battery low power w/o DC adaptor connected
AUX IN
Lights up Orange
Connected via LINE-IN
SET
Flashes Green Slowly
1. Reset to factory default
2. Firmware update
WLAN
Flashes White
1. Booting process
2. WPS is processing
Lights up solid White
1. System is ready for WLAN connection
2. Play Modus
VOL -/+
Flashes
volume increase/decrease
MUTE
Flashes Slowly
Mute
1.4 LED on the rear to show battery charging status
LED
Display
Status
Flashes red
Battery Charging
Charging indicator
Solid red
Full Charged
Off
Unplug DC adaptor
