DVD INPUT
Y
Cb
Cr
IN2
OUT
VIDEO
AUDIO
R
L
-
-
75OHM
ANTENNA
INPUT
DVD INPUT
Y
Cb
Cr
IN2
OUT
VIDEO
AUDIO
R
L
-
-
75OHM
ANTENNA
INPUT
Basic Antenna Connection
75 OHM
ANTENNA
INPUT
UHF/VHF
Combiner
75-300 Ohm Adapter
VHF Antenna
VHF Antenna
UHF Antenna
Rear of TV
OR
A combination antenna receives normal
broadcasting channels (VHF2-13 and UHF
14-69). Your connection is easy since you
will connect the antenna to the 75OHM
ANTENNA INPUT jack on the rear of the
TV.
If your antenna has a round cable
(75
ohm) on the end, then you are ready to
connect it to the TV. Go to step 2.
If your antenna has flat twin-lead wire
(300 ohm), you first need to attach the
antenna wire to the screws on a 300 to
75 ohm adapter (not supplied with TV).
Push the round end
of the adapter or
antenna cable onto the 75 OHM ANTE-
NNA INPUT jack on the rear of the TV. If
the round end of the antenna cable is
threaded, screw it down finger tight.
If you have separate UHF and VHF antennas, you need an
optional combiner to connect to the TV.
6
Plug the TV
power cord into a power
outlet and turn on the TV.
Set TV/CATV
to CATV as detailed on page 11.
Refer to
AUTO SEARCH
to set up your
available channels. Details are on page 12.
s
Note: this TV has no hand grip, which
is a recess at either side of the cabinet
for ease of transportation of bigger sets.
