Magnavox 32MD304V/F7, Owner'S Manual

Repeat A-B Playback

You can Repeat Playback between A and B on a Disc.

1

During Playback, press 

MODE

 repeatedly until 

A B

A B

 appears.

2

Press 

OK

 at your desired Starting point (A).

3

Press 

OK

 at your desired Ending point (B).

●

Point B should be in the same Title or Track as point A.

●

Within a few seconds, the selection A-B will begin to Play back
repeatedly.

4

To Cancel Repeat A-B Playback, press 

MODE

 repeatedly until 

A B

A B

appears.
Press 

OK

 so 

OFF

 appears.

Note(s)

●

Repeat setting (except 

ALL

) will be cleared when moving to another Title or Chapter,

Track.

●

During Programmed Playback, Repeat setting will be effective for the Tracks in the
program.

●

Repeat Playback or Repeat A-B Playback may Not be available with some Discs.

●

Repeat A-B Playback does not function during another Repeat mode.

●

To Cancel Point A, press 

CLEAR

 at step 2 in 

Repeat A-B Playback

.

●

Stopping Playback will Cancel Repeat A-B Playback.

Random Playback

CD

This function Shuffles the Playing order of Tracks instead of sequential
Playback.

1

In STOP mode, press 

MODE

 repeatedly until the 

RANDOM

 Menu

appears.

2

Press 

K

(PLAY) to start Random Playback.

Note(s)

●

To Repeat the current Track in the Random mode, follow the steps 1 and 2 in 

Repeat

Playback

 and select 

TRACK

. 

L

  p. 37

●

To Repeat the entire random selections, follow the steps 1 and 2 in 

Repeat Playback

 and

select 

ALL

. 

L

  p. 37

Programmed Playback

CD

You may determine the Order in which Tracks will play back.

1

In STOP mode, press 

MODE

 repeatedly until the 

PROGRAM

 Menu

appears.

2

Use 

H

I

 to Select a desired Track, then press 

OK

 to Store it.

●

Additional Tracks may be on other screens. Use 

H

I

 to go on to

the Next / Previous pages.

●

Repeat this Step until you have selected all the Tracks you wish to
play back in the program.

●

Up to 99 Tracks can be ordered.

●

If 8 or more Tracks were in a Program, use 

H

 / 

G

 to see All

the Tracks.

3

Press 

K

(PLAY) to start Programmed Playback.

Note(s)

●

Press 

CLEAR

 to Erase the last Track in the program if you make an error.

●

To Erase all Programmed Tracks at once, select 

ALL CLEAR

 and press 

OK

 at step 2.

●

While a Program is being Played back, 

C

 works as follows:

–

Pressing 

C

 once: The Track will be in the Resume Standby mode. Next time you press

K

(PLAY), the Playback will Resume from the Point where it is Stopped in the

Programmed Playback.

–

Pressing 

C

 twice: Resume mode will be Cancelled. Next time you press 

K

(PLAY),

Playback will Restart from the First Track in the Original order. However, your
Programmed Playback can be Restarted when you follow the above steps. (Your
Programs are still Stored until either the Disc is Ejected or the Unit goes into Standby
mode.)

–

On some Discs, 

C

 will not work while the Resume message appears. Please wait until

the Message disappears.

●

To Repeat the current track in the program, follow the steps 1 and 2 in 

Repeat

Playback

 and select 

TRACK

. 

L

  p. 37

●

To Repeat the Entire Program, follow the steps 1 and 2 in 

Repeat Playback

 and select

ALL

. 

L

  p. 37

●

Ejecting the Disc or the Unit goes into Standby mode will Erase the program.

●

You cannot use the Number keys to select another Track during Programmed Playback.
Use 

H

 / 

G

 to select other Tracks in the program.

●

You cannot combine Random Playback with Programmed Playback.

●

You cannot alter a programmed order during Playback.

●

You can start Programmed Playback only while in 

PROGRAM

 menu.

38

.

English

Continued on next page.