USB
Your TV is fitted with a USB connection that enables you to view
JPEG photos or watch Motion JPEG files stored on a USB memory
stick.
1
Connect the USB memory stick to the USB terminal on the
back of your TV.
2
Press
MENU
and use
H
I
to select
USB
, then press
OK
.
●
The highlighted text will move to
Start now
, then press
OK
again.
device.
pictures and videos via your USB
This menu allows you to enjoy your
USB
Language
Features
Setup
Sound
Picture
Start now
3
Use
H
I
to select the
Picture
or
Video
, then press
OK
.
●
These recorded files must meet specifications shown
below:
Picture
(JPEG)
Upper limit 4000 x 4000 pixels
Video
(Motion
JPEG)
Size
320 x 240 (QVGA)
Frame rate 30fps
Audio type LPCM
Sampling frequency
(32 kHz, 44.1 kHz or 48 kHz)
Quantization bit rate (16 bit)
Note(s)
●
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.
●
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.
●
Up to 255 English characters can be recognized.
●
This unit does not support MTP (Media Transfer Protocol).
●
This unit supports FAT16 and FAT32 file systems.
●
If the file is not supported, an error message appears.
●
When the USB memory stick is not recognized, try reconnecting it again.
●
We cannot be held responsible if your USB memory stick is not supported,
nor will we accept any liability for damage or loss of stored data.
●
To protect your USB memory stick files from being erased place the write
protect sliding tab in the protect position (if available).
●
Be sure to keep a backup copy of the original files on your device before
you play them back on this unit.
●
This unit does not recognize USB memory stick that requires a special
driver.
●
This unit is not allowed to use the USB memory stick which requires an
external power supply (500mA or more).
●
A file name exceeding 128 characters or contains a dot character is not
supported on this TV.
●
Progressive JPEG files are not supported.
●
Only a Motion JPEG file with an “.avi” extension is supported. An extension
“.mov” is not supported.
●
During Motion JPEG playback, “Pause”, “Forward” and “Reverse” do not
work on this unit.
Picture (JPEG)
1
Use
H
I
to select the desired file, then press
OK
.
1
2
3
4
Press "OK" key to play/pause.
Thumbnails
Image5.jpg
Image4.jpg
Image3.jpg
Image2.jpg
Image1.jpg
Image1.jpg
Picture
Picture
1024:768
2009/04/02 17:42:06
Image1.jpg
Go to root folder
●
To toggle between
List
and
Thumbnails
press
the NUMBER
2 key
each time.
●
The unit goes to the slide show automatically.
To pause / play the slide show, press
OK
.
●
Use
the NUMBER keys
(
1
through
4
) to see the file details
(
) or change the following settings (
~
).
See the description in table below.
Item
Detail
More detail
Press
1
to display file details below.
Name
,
Album
,
Date
,
Size
or
Next
.
Press
1
again to remove file details.
Start show
Press
4
or
OK
to start the slide show.
While the slide show is on, the following 2
settings will be displayed.
Transitions
Press
2
, then use
H
I
to select the transition
mode choosing from;
None
,
Dissolve
,
Wipe right
,
Wipe left
,
Wipe up
,
Wipe down
,
Box in
or
Box out
.
Slide time
Press
3
, then use
H
I
to change the display
time choosing from;
Short
,
Medium
or
Long
.
Stop show
Press
4
or
OK
to stop the slide show.
While the slide show is off, the following 3
settings will be displayed.
Repeat
Press
1
, then use
H
I
to select the repeat mode
choosing from;
Off
,
One
or
All
.
Rotate
Every press on
2
will turn the picture clockwise
by 90 degrees.
Zoom
Press
3
, then use
H
I
to select the zoom factor
(1x, 2x or 4x). Press
OK
to set the zoom factor.
31
.
English
Continued on next page.
