Magnavox 50ME336V Owner'S Manual Download

Page: 3 / 14

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades

grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug

with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide

has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If

blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult

the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or

Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,

pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

and the point where they exit from the apparatus.

11.

Only use attachments / accessories specified by the

Only use attachments / accessories specified by the
manufacturer.

manufacturer.

12.

Use only with the cart, stand, tripod, bracket, or

Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or

table specified by the manufacturer, or
sold with the apparatus. When a cart

sold with the apparatus. When a cart
is used, use caution when moving the

is used, use caution when moving the
cart / apparatus combination to avoid

cart / apparatus combination to avoid
injury from tip-over.

injury from tip-over.

13.

Unplug this apparatus during lightning storms or when

Unplug this apparatus during lightning storms or when
unused for long periods of time.

unused for long periods of time.

14.

Refer all servicing to qualified service personnel.

Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or

damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects

plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been

have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate

exposed to rain or moisture, does not operate
normally, or has been dropped.

normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s

This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines for

attention to Article 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground

proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close

shall be connected to the grounding system of the building, as close
to the point of cable entry as practical.

to the point of cable entry as practical.

Example of Antenna Grounding as per NEC - National

Example of Antenna Grounding as per NEC - National
Electric Code

Electric Code

ANTENNA LEAD IN WIRE

GROUND CLAMP

ANTENNA DISCHARGE UNIT

ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)

(NEC SECTION 810-20)

ELECTRIC SERVICE EQUIPMENT

GROUNDING CONDUCTORS

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

(NEC SECTION 810-21)

POWER SERVICE GROUNDING ELECTRODE

POWER SERVICE GROUNDING ELECTRODE
SYSTEM (NEC ART 250, PART H)

SYSTEM (NEC ART 250, PART H)

GROUND CLAMPS

Wall Mount Bracket Kit

Brand

Model #

Screw dimension

50ME336V

SANUS

VuePoint F80B

M6 x 0.472" (12mm)

•

The recommended Wall Mount Bracket Kit (sold
separately) allows the mounting of the TV on the wall.

•

For detailed information on installing the wall mount,
refer to the Wall Mount Instruction Book.

•

Funai is not responsible for any damage to the product
or injury to yourself or others if you elect to install the
TV Wall Mount Bracket or mount the TV onto the
Bracket on your own.

•

The Wall Mount Bracket must be installed by experts.

Funai is not liable for these types of accidents or injuries
noted below.

•

Install the Wall Mount Bracket on a sturdy vertical wall.

•

If installed onto a ceiling or slanted wall, the TV and Wall

Mount Bracket may fall which could result in a severe injury.

•

Do not use screws that are longer or shorter than their

specified length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.

•

Do not fasten the screws by excessive force. This may

damage the product or cause the product to fall, leading to
an injury.

•

For safety reasons use 2 people to mount the TV onto a

Wall Mounting Bracket.

•

Do not mount the TV onto the Wall Mounting Bracket

while your TV is plugged in or Turned On. It may result in an
electrical shock injury.

When installing the unit on the wall, allow this much space.

Top:

11.8 inches (30cm)