STOP
PLAY
B
15
EN
V
IDEO CASSETTE
This unit will operate with any cassette that has the
mark. For best results, we recommend the
use of high-quality tapes. Do not use poor quality or
damaged tapes.
SELECTING TAPE SPEEDS
Before recording, select the tape speed from :
SP
mode
(Standard Play) or
SLP mode
(Super Long
Play). You can also play a tape recorded in
LP mode
(Long Play).
ERASE PREVENTION
Break off the tab on the
back edge of the cassette
to prevent accidental eras-
ing of recording.
Cover the hole with plastic
tape to record on the tape
again.
NOTES:
• In the TV/VCR mode, if the cassette without tab is insert-
ed, playback will start automatically.
• If you press
[REC/OTR]
or
[REC]
when a cassette with-
out tab is inserted, the unit will eject it automatically.
Tab
Plastic Tape
P
LAYBACK
BASIC PLAYBACK
TV/VCR
TV/VCR
ON-SCREEN DISPLA
Y /
VIDEO CASSETTE / PLA
YB
A
C
K
TV/VCR SECTION
Tape Speed
Recording/Playback time
T120
T160
T60
Type of tape
2 hours
2-2/3 hours
1 hour
SP mode
6 hours
8 hours
3 hours
SLP mode
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically when
you start playback (Digital tracking function).
• If noise lines (black and white streaks) appear on
the playback picture, use
[CH.
K
K
/
L
L
]
until the
streaks disappear (Manual tracking adjustment).
This is available in Pause/Still/Slow mode, too.
• To release manual tracking mode, stop the tape
once and start playback again.
STILL PICTURE
• During playback, press
[PAUSE
F
]
to freeze the
picture.
You can advance the picture frame by frame by
pressing
[PAUSE
F
]
repeatedly.
• To release the Still mode, press
[PLAY
B
B
]
.
SLOW MOTION
• During playback, press
[PAUSE
F
]
then press
[FWD
D
]
.
• To release the Slow mode, press
[PLAY
B
B
]
.
NOTE:
• If the unit keeps the slow mode or still mode for more
than 5 minutes, it will automatically enter the stop mode.
REW
E
FF
D
EJECT
A
1
Insert a pre-recorded tape so that the
unit turns on automatically (Auto
Power On).
2
Select TV/VCR mode by pressing
[SELECT]
.
NOTE:
• If the erase-prevention tab has been removed, the
unit will change the VCR mode and starts playback
automatically.
3
To start playback,
press
[PLAY
B
B
]
.
NOTE:
• Even in the DVD mode, you can start the VCR play-
back if you press
[PLAY
B
B
]
on the front panel (of
the TV/VCR side).
4
To stop the playback,
press
[STOP
C
C
]
.
5
To rewind the tape,
press
[REW
E
]
.
To forward the tape,
press
[FWD
D
]
.
To stop winding, press
[STOP
C
C
]
.
6
To eject the tape from the unit,
press
[STOP/EJECT
C
/
A
]
on the front panel.
T1204CE(EN)_NEW.QX3 06.3.24 0:33 PM Page 15
Summary of Contents for CMWC20T6
Page 37: ...37 MEMO...
