Magnavox DP170MW8B, Owner'S Manual

DVD FUNCTIONS

– 20 –

EN

6

    To complete the 

“PROGRESSIVE” 
setting

AUDIO Setting

Choose the appropriate audio setting for your device. It only affects during the playback of DVD. Follow steps 1 to 3 in the 
“CUSTOM Menu” section on page 18.

C

4

Select the desired item.

AUDIO

DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM

HDMI AUDIO 

ON

OK

AUDIO menu

5

DRC (Dynamic Range Control):  (Default: ON)

Set to “ON” to compress the range between soft and loud 
sounds.

DOLBY DIGITAL: 

QUICK

(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital 
decoder.
•  BITSTREAM: outputs Dolby Digital signals.
•  PCM: converts the Dolby Digital into PCM (2 channel).

DRC ON
DOWN SAMPLING  ON
DOLBY DIGITAL 

BITSTREAM

HDMI AUDIO 

ON

OFF
ON
BITSTREAM
ON

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48kHz.
Set to “OFF” when outputting the original sound.

DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL 

BITSTREAM

HDMI AUDIO 

ON

ON
ON
PCM
ON

DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL 

BITSTREAM

HDMI AUDIO 

ON

ON
OFF
BITSTREAM
ON

Note:

DRC:

• This function is available 

only on the discs which 
are recorded in the Dolby 
Digital format.

DOWN SAMPLING:

• When playing back a 

96kHz disc with the 
copyright protection, or 
when virtual surround is 
set to “1” or “2”, the sound 
will be down sampled at 
48kHz even if the “DOWN 
SAMPLING” is set to “OFF”.

• When the HDMI sound 

can be output, the setting 
change cannot be done.

• 

This function is available 
only on digital 
outputting of a disc 
recorded in 96kHz.

HDMI AUDIO:

• When the HDMI sound 

cannot be output the 
setting change cannot be 
done.

6

To exit the menu

SETUP

OK

OK

OK

Note:

• In “QUICK” menu, “PLAYER 

MENU”, “TV ASPECT”, 
“PROGRESSIVE” “HDMI 
MODE” or “DOLBY DIGITAL” 
are available. “QUICK” menu 
consists of the setting menu 
frequently used, and they 
are accompanied with 

QUICK

. You can make all settings in 
“CUSTOM” menu.

HDMI AUDIO:
(Default: ON)

This function is only available when you use an HDMI 
connection.
•  ON: to output the HDMI sound.
•  OFF: not to output the HDMI sound.

DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL 

BITSTREAM

HDMI AUDIO 

ON

ON
ON
BITSTREAM
OFF

OK

or

5

OK

OK

OK

or

or

PROGRESSIVE: 

QUICK

(Default: OFF)

See note on the right.

TV ASPECT           4:3 LETTERBOX
STILL MODE           AUTO
PROGRESSIVE     OFF
HDMI MODE  

480p

PROGRESSIVE MODE            AUTO 1
FORMAT 

        RGB

RGB RANGE          NORMAL

4:3 LETTERBOX
AUTO
ON
480p
AUTO 1
RGB
NORMAL

NO
YES

NO
YES

Confirm again to use progressive scan.
  If Picture is good, Select “YES”.

SELECT:  

K

 / 

L

SET:OK

If there is no picture or you 
do not press any buttons 
for 15 seconds, Progressive 
Scan will switch to “OFF”.

Before proceeding…

1. Make sure your TV has progressive scan.
2. Connect with component video cable

NOTE:  If there is no picture or picture is 
 

distorted after selecting “YES”, 

wait about 15 seconds for auto recovery.

  
A c t i va t e   P r o gr e s s i ve ?  

SELECT:  

K

 / 

L

               SET:OK

NO
YES

If “PROGRESSIVE” is “ON”, 
this message appears:

Select “YES”.

Select “YES”.

SETUP

Note:

PROGRESSIVE:

• You can set “PROGRESSIVE” 

to “OFF” either in “DISPLAY” 
menu or by pressing and 
holding 

[PLAY

B

] 

on the 

front of the unit for more 
than 5 seconds.

• When “PROGRESSIVE” is 

“ON”, video signals from 
VIDEO OUT and S-VIDEO OUT 
jacks will be distorted or not 
be output at all.

Follow steps 1 to 3 in the “CUSTOM menu” section on page 18 and step 4 on page 19.

E6E75UD_DP170MW8B_EN_v1.indd   20

E6E75UD_DP170MW8B_EN_v1.indd   20

2009/02/04   10:45:50

2009/02/04   10:45:50