Magnavox E6C70UD, Service Manual

1-7-1

E6A70FW

FIRMWARE RENEWAL MODE

1. Turn the power on and remove the disc on the tray.

2. To put the DVD player into version up mode, press 

[9], [8], [7], [6], and [SEARCH] buttons on the 
remote control unit in that order. The tray will open 
automatically. 
Fig. a appears on the screen.

The DVD player can also enter the version up 
mode with the tray open. In this case, Fig. a will be 
shown on the screen while the tray is open.

3. Load the disc for version up.

4. The DVD player enters the F/W version up mode 

automatically. Fig. c appears on the screen. If you 
enter the F/W for different models, “Disc Error” will 
appear on the screen, then the tray will open 
automatically. 

The appearance shown in (*1) of Fig. c is 
described as follows:

5. After programming is finished, the tray opens 

automatically. Fig. e appears on the screen and 
the checksum will be shown in (*2) of Fig. e. 

At this time, no button is available.

6. Remove the disc on the tray.

7. Unplug the AC cord from the AC outlet. Then plug 

it again.

8. Turn the power on by pressing the [STANDBY-ON] 

button and the tray will close.

9. Press [1], [2], [3], [4], and [DISPLAY] buttons on 

the remote control unit in that order. 
Fig. g appears on the screen.

10. Press [CLEAR] button on the remote control unit. 

Fig. h appears on the screen.

When “OK” appears on the screen, the factory 
default will be set. Then the firmware renewal 
mode is complete.

11. To exit this mode, press [STANDBY-ON] button.

No.

Appearance

State

1

Reading...

Sending files into the memory

2

Erasing...

Erasing previous version data

3

Programming... Writing new version data

F/W Version Up Mode

Model No : *******
VERSION : *.**

   Please insert a DISC

for F/W Version Up.

EXIT: POWER

"*******" differs depending on the models.

Fig. a  Version Up Mode Screen

VERSION :             ************.abd
Reading...

F/W Version Up Mode

Model No : *******
VERSION : *.**

Fig. c  Programming Mode Screen

"*******" differs depending on the models.

(*1)

VERSION :             ************.abd
Completed

SUM : 7ABC

F/W Version Up Mode

Model No : *******
VERSION : *.**

"*******" differs depending on the models.

Fig. e  Completed Program Mode Screen

(*2)

   MODEL : *******
      Version : *.**
      Region  : *

EXIT: POWER

EEPROM CLEAR : CLEAR

Fig. g

"*******" differs depending on the models.

   MODEL : *******
      Version : *.**
      Region  : *

   EEPROM CLEAR : OK

EXIT: POWER

EEPROM CLEAR : CLEAR

"*******" differs depending on the models.

Fig. h