6 DVD
Settings are only Effective when the Unit is in DVD mode and
any Discs
should not be Playing back.
1
In STOP mode, press
DVD SETUP
and use
to
select a desired setting and an item, then press
OK
to
determine the setting.
OK
ENGLISH
OFF
ORIGINAL
ENGLISH
DISC MENU
SUBTITLE
AUDIO
SETUP MENU
LANGUAGE
2
When the setting is completed, press
DVD SETUP
to
EXIT.
DVD Language Setting
You can change the desired Language when Playing back the
Disc.
1
In STOP mode, press
DVD SETUP
and use
to
select
LANGUAGE
.
2
Use
to select the item you want to adjust, then
press
OK
.
3
Adjust the following items.
SETUP MENU
Select the desired On-screen Language.
AUDIO
*1
,
*2
Select the desired Audio Language.
SUBTITLE
*1
,
*2
Select the desired Subtitle Language.
DISC MENU
*1
Select the desired Language in DVD Menu.
Note(s)
*1
●
Language options are Not available with some Discs.
●
Only the Languages supported by the Disc can be selected.
*2
●
Language setting for Audio and Subtitle are Not available with
some Discs.
–
Use
MODE
to select Subtitles available on the DVD.
–
Use
SAP / AUDIO
to select Audio available on the DVD.
●
If the DVD’s default settings for Audio and Subtitle are the same
Language, the Subtitles may not show unless you turn them On.
DVD Audio Setting
Choose the appropriate Audio Settings for your equipment.
It only affects the Audio during the Playback on a DVD.
1
In STOP mode, press
DVD SETUP
and use
to
select
SOUND
.
2
Use
to select the desired item, then press
OK
.
OK
MULTICHANNEL
ON
ON
DOLBY DIGITAL
DOWN SAMPLING
DRC
SOUND
3
Adjust the following items.
DRC (dynamic range control)
This function is available only on the Discs which are
recorded in the Dolby Digital format.
ON
Compress the range between soft and loud sounds.
OFF
No effects (original sound).
DOWN SAMPLING
This function is available only on digital outputting of a Disc
recorded in 96 kHz.
ON
When outputting in 48 kHz.
OFF
When outputting the original 96 kHz sound.
DOLBY DIGITAL
Set to
MULTICHANNEL
when this Unit is connected to a
Dolby Digital decoder.
MULTICHANNEL
Outputs Dolby Digital signals.
PCM
Converts the Dolby Digital into PCM. (2
channel)
11
Continued on next page.
English
