EN-44
D
Note
for “IP Address”, “Subnet Mask”, “Default Gateway”, “Primary DNS” and “Secondary DNS”
• The range of input numbers is between 0 and 255.
• If you enter a number larger than 255, the number will automatically be 255.
• When you enter a wrong number, select “Clear” to clear. (The number will be back to “0”.)
• If you want to enter a 1 or 2-digit number in one cell, press
[
Æ
]
to move on to the next digit’s in the cell.
D
Note
for “Proxy Address” and “Proxy Port”
• The range of input numbers for the port number is between 0 and 65535. (If you enter a number larger than
65535, it will be regarded as 65535.)
• For proxy port, certain ports might be closed, blocked or unusable depending on your network environment.
• Choose a connection speed in accordance with your network environment.
• When the settings are changed, the network connection may be disabled depending on the device.
■
■
Wireless
If you connect this unit to a wireless network, select “Wireless” and set up necessary settings.
Please make a note of your wireless network name and its WEP / WPA / WPA2 key before proceeding with the setup.
Auto■Scan■(Wireless)
1. Use
[
Î
/
ï
/
Í
/
Æ
]
to select “Network Setup” in the home menu, then press
[OK]
.
2. Use
[
Î
/
ï
]
to select “Wireless”, then press
[OK]
.
3. Use
[
Î
/
ï
]
to select “Auto Scan”, then press
[OK]
.
• This unit will start searching for wireless networks automatically.
4. The result of wireless network searching will be displayed. Use
[
Î
/
ï
]
to select the appropriate wireless network
name (SSID), then press
[OK]
.
• If you select an SSID with “ ”, please go to step 6.
Access Point Setting (Auto Scan)
Please select the access point.
3 / 7
Cancel
Retry
Access 1
Access 2
Access 3
5. “WEP/WPA Key” entry screen will appear. Enter the WEP / WPA / WPA2 key of the selected wireless network
using cursor buttons, number buttons and color key, then press
[RED]
.
• If you do not know the WEP / WPA / WPA2 key for your Wireless network, ask your ISP or the person who
set up your Wireless Network. The “WEP / WPA / WPA2 Key” entries are case-sensitive.
1 2 3 4 5 6 7 8 9 0
SP
a/A/@
CLR
Done
a b c d e f
g h i
j
h l
m n o p q r s
t
u v w x y z .
-
Done
Cancel
Clear
a/A/@
3 / 7
Access Point Setting (Auto Scan)
Please input the WEP/WPA Key with software keyboard.
XXXXXXX
Continued on next page.
