16 Setting the Clock
1
Press MENU. Press PLAY/
▲
or STOP/
▼
to
select SETTING CLOCK, then press
F.FWD/
B
.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
2
With AUTO CLOCK selected, press
F.FWD/
B
or REW/
s
repeatedly until ON
appears beside AUTO CLOCK.
– SETTING CLOCK –
B
AUTO CLOCK
[ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]
• If the TV/VCR is connected to a
Cable Box or Satellite Receiver,
select the local PBS station on
the Cable Box. Set the TV/VCR
to the output channel of the
Cable Box or Satellite Receiver
(usually channel 3 or 4), to set
the clock automatically.
• The TV/VCR cannot control or
change the channels of the
Cable Box or Satellite Receiver.
Helpful Hints
Set the clock accurately for proper timer recording. If a
Public Broadcasting Station (PBS) is available in your area,
follow Auto Clock Setting below. If not, follow Manual
Clock Setting on pages 18-19.
Auto Clock Setting
You can have the TV/VCR set the clock automatically by
using the PBS channel in your area. Once you have set the
clock, the TV/VCR will automatically monitor the correct
time and date being broadcast by the PBS station and con-
tinuously update the time accordingly.
Before you begin, make sure ...
●
The TV/VCR power is on.
●
The antenna/Cable TV connections are correct.
●
The Cable Box is on (if applicable). (See Helpful Hints.)
●
Channels are set. Details are on pages eight and 14.
1-3
1
3
If you already know your PBS channel number,
skip ahead to step 6 on the next page.
If you do not know the channel number of
your local PBS station, press STOP/
▼
to select
AUTO CLOCK CH SEARCH, then press
F.FWD/
B
.
– SETTING CLOCK –
AUTO CLOCK
[ON]
B
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]
MC132EMG\MC192EMG 1/31/03 10:41 AM Page 16
