Listening to a Record
Otherwise, the turntable will not be functioning.
1. In first time use, take off the protective cover from the stylus as the illustrated below:
2. Place the Record on the center spindle.
3. Slide the Speed selector to 33; 45 or 78 to match the play speed of the record.
4. Unlock the Tone Arm from the holder as the illustrated below:
Note: If you are playing a 45 RPM Single (small size record), place the supplied 45 RPM
5. Power on the unit and turn the Function selector to the PHONO/AUX position as the instructed
6. Raise the Lever to raising the Tone arm then move it to the top of the desired location
7. When finished playback, the unit will auto stop turning (or you wants to stop immediately);
adapter to the center spindle
then place the record on it.
earlier.
raise the Lever to rising
the Tone arm then put it back to the Holder.
of the record. Release the
Lever to put the Tone arm onto the record. Plays will auto start.
Plastic white color protective cover
Release the Lever then lock the Tone arm on the Holder.
NOTE:
clip
9
If you don't use the adaptor, place it to the tray as the illustrated below:
Tone arm
Before record playback, make sure the audio connection cable has not plugged in the AUX (in) jack on rear
of the unit.
Summary of Contents for MD695
Page 1: ......
Page 7: ...6 Release the metallic holder as the illustrated below then close top cover 1 2 3 7...
Page 15: ......