background image

DC-12V

L

R

AUX IN:

Mobile Phone

To the Line In/AUX In 
jacks on the external

 audio amplifier 

Other Connections

(Audio connection cable included) 

(Connection cable  not included) 

Connect to the Phones; AUX out;
Line out jack of the external devices

 (Such like MP3 Player; cell phones; 

 iPod/iPad ... etc)

LINE OUT:

Listen to music from the external audio player as follows:
1. Connect one end of the supplied audio connection 

cable to the Phones jack; Line out jack or AUX out 
jack on the external audio player.

2. Connect the other end to the AUX IN jack on the 

front of unit as the illustrated below:

5. Play the music on the connected external audio

 player as usual.

player is set to high. Otherwise, sound from

 this unit may weak.

Listening from external audio amplifier:
1. Connect one end of the RCA audio connection cable 

(not supplied) to the Line IN jacks or AUX IN jacks on  

the external audio amplifier.

2. Connect the other end of the cable to the LINE OUT  

jacks on the rear of unit as the illustrated below:

3. Power on the unit and plays music as usual as the 

instructed earlier. 

4. Power on the external audio amplifier and set it to

LINE IN mode to play the music from this unit.

Notes:

 Make sure the volume level of the external audio 

11

MP3

FM

87

To AUX IN jack 
on front of 

the unit

3. Turn the Power ON-OFF/Volume knob clockwise 

to power on the unit and set the volume to the

 desired level.

4. Turn the Function selector to the AUX position. 

The Red indicator will illuminate.

Summary of Contents for MD708















Reviews: