45
EN
EN
Recording
Basic Setup
Connections
Playback
Editing
Introduction
Function Setup
Others
Español
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
5
Press [STOP
C
] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 82.)
e.g.) DVD-R
Writing to Disc
90%
• This operation may take awhile to be
completed.
4
Press [REC] to start recording.
“
I
HDD” or “
I
DVD” will be displayed for 4 seconds.
e.g.) DVD
I
DVD
SP(2Hr)
2h00m
Press
[PAUSE
F
]
to pause recording.
Press
[PAUSE
F]
]
or
[REC]
again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press
[REC]
repeatedly until the desired recording time
(30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
0h30
m
1h00
m
(nor
m
al recording)
7h30
m
8h00
m
I
0h30m
To change the recording length during the one-
touch timer recording:
Press
[REC]
repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press
[STOP
C
]
.
When the recording is completed, the unit will ask
you whether to turn the unit to the standby mode
except under conditions listed below.
- If a timer recording is programmed to start in 5 minutes.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned to the standby mode automatically if
you select “Yes” or if you do not reply in 1 minute.
Note(s)
• When you press
[REC]
, recording starts immediately and continues until the HDD or disc is full, record 12 hours to
HDD or you stop recording.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 36-37 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
• You can play back a title on one component while making a recording on other. To do so, simply select the
component (HDD or DVD) you like to use for the playback by pressing
[HDD]
or
[DVD]
during HDD / DVD
recording. And then follow the normal playback procedure.
• If playback and recording are in progress at the same time, select the appropriate component by pressing
[HDD]
or
[DVD]
before you press
[PAUSE
F
]
or
[STOP
C
]
to pause or stop the operation.
Note(s) for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY]
to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to the standby mode to stop one-touch timer recording.
- Using
[REC]
or
[STOP
C
]
on the remote control.
• You cannot use the pause function during one-touch timer recording.
Summary of Contents for MDR557H
Page 126: ...126 ES MEMO...