EN - 10
Rear Panel
R
L
AUDIO
VIDEO
OPTICAL
RESET
5V
900mA
ANTENNA
HDMI OUT
USB
LAN
DIGITAL OUT
IN
R
L
AUDIO
VIDEO
OUT
IN
OUT
1
11
7
8
9
10
6
5
4
2
3
Available on MDR868H, MDR867H only.
AC plug
1
VIDEO / AUDIO IN
jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a set of RCA Video/Audio Cables.
2
ANTENNA IN
jack
Use to connect an Antenna / Cable Box / satellite
Receiver for TV pass through only.
3
Wireless LAN
adapter
MDR868/867H
Use to connect a Wireless LAN Router.
4
AC Power
Cord
r
• Connect to a standard AC outlet to supply Power to
this unit.
• Unplug this cord from the AC outlet to completely
shut down the unit.
5
LAN
terminal
MDR868/867H
Use a shielded LAN Cable to connect to a Network
device (hub, broadband Router, modem, etc.).
6
USB
input
Use to connect an External HDD or USB memory stick
with a Software Update file.
7
HDMI OUT
jack
Use to connect this unit and the Display with an HDMI
Cable.
8
RESET
button
To completely shut down the unit, you must go through
the hole to push on the RESET Button
9
DIGITAL OUT (OPTICAL)
jack
Use to connect to another External device with a Digital
Audio Optical Input jack with the Digital Audio Optical
Cable.
10 ANTENNA OUT
jack
Use to connect an RF Coaxial Cable to pass the signal to
the ANTENNA IN on your TV.
11 VIDEO / AUDIO OUT
jacks
Use to connect a TV/Monitor, AV Receiver or other
devices with a set of RCA Video/Audio Cables.
1
STANDBY / ON
button
• Press to turn On the unit or to turn the unit into
Standby mode.(To completely shut down the unit, you
must unplug the AC power cord)
2
Disc Tray
3
OPEN / CLOSE
button *
• Press to Open or Close the Disc Tray.
4
Display window
5
HDD
button
• Press to Select the HDD mode or External HDD
mode.
6
DVD
button
• Press to Select the DVD mode.
7
C
STOP
button
• Press to Stop Playback or Recording.
8
1
PLAY
button *
• Press to Start Playback or Resume Playback.
9
I
RECORD
button
• Press once to Start Recording.
• Press repeatedly to Start the OTR (One-Touch Timer
Recording) and set the Recording Time.
10
/
CHANNEL
buttons
11 AUDIO IN
(L2) jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a RCA Audio Cables.
12 S-VIDEO / VIDEO IN
(L2) jacks
Use to connect a TV Monitor, AV Receiver or other
devices with a S-Video Cable or RCA Video/Audio
Cables.
13
Infrared sensor window
Receives IR signal from your Remote Control so that you
can control the unit from a distance.
(
*
) The unit can also be turned on by pressing these Buttons.
Front Panel
1
2
3*
4
5
6
7 8* 9
11
10
12
13
EN.indd 10
2015/09/02 19:00:23
