EN - 59
FUNCTION SETUP
EN
Clock
Configure the Clock, Time zone and Daylight Saving Time
settings.
If the Clock is not set correctly, Scheduled Recording does not
work properly.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Clock Setting
Clock Setting
If this unit is unable to obtain the Clock information
automatically, set up the Clock manually.
2
Enter ‘Month’ / ‘Day’ / ‘Year’ / ‘Hour’ /
‘Minute’ and Select “AM” or “PM” using
[
K
/
L
/
0
/
1
]
, then press
[ OK ]
.
Time Zone
Time Zone
Set your Time zone. This unit recognaizes 7 Time zones.
2
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Time Zone
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
GMT(Greenwich Mean Time ) - 4 hours
GMT(Greenwich Mean Time ) - 5 hours
GMT(Greenwich Mean Time ) - 6 hours
GMT(Greenwich Mean Time ) - 7 hours
GMT(Greenwich Mean Time ) - 8 hours
GMT(Greenwich Mean Time ) - 9 hours
GMT(Greenwich Mean Time ) - 10 hours
Daylight Saving Time
Daylight Saving Time
Daylight saving Time is referred to as “Summer Time”.
Using this function lets you set the Clock back and ahead for
Daylight Saving Time.
2
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Old
Off
Activate.
Deactivate.
Auto Clock Setting
Auto Clock Setting
This unit can set the Time and Date automatically by referring
to a Channel that carries Clock information.
2
Select “Old” using
[
K
/
L
]
, then press
[ OK ]
.
• Channel selection window will appear.
3
Select a Channel using
[
K
/
L
]
, then press
[ OK ]
.
• This unit will automatically search for the Clock
information and Display the result.
4
Press
[ OK ]
to finish.
Initialization
Initializes settings on the unit.
1
Select a desired item using
[
K
/
L
]
, then
press
[ OK ]
.
Initialize for Network Setting
MDR868/867H
You can Reset the status of Network settings.
Initialize Setting
s
You can Reset the status of setup Menu.
Initialize for Personal Information
You can Reset your personal information to the factory
default.
• Confirmation message will appear.
2
Select “Yes” using
[
K
/
L
]
, then press
[ OK ]
.
• When “Initialize for Personal Information” is Selected,
confirmation message will appear again. Select “Yes”
using
[
K
/
L
]
, then press
[ OK ]
.
Note(s)
• These settings Listed below will remain unchanged even
after the “Initialize Setting”.
–
Child Lock
–
Network Connection
–
Remote Control Code
• When “Initialize for Personal Information” is performed, all
Recorded Titles in HDD and Registered External HDDs
will be Deleted.
OSS
Open Source Software license information on the Software
used in this unit.
1
Press
[ OK ]
to finish.
EN.indd 59
2015/09/02 19:01:07
