Magnavox MG3S, User Manual

7

6

Setup

Battery Installation

1. On the back of the remote,

push down on the tab and
lift the cover off.

2. Match the batteries to the

+ and - marks inside the
battery case, then insert 2
AAA Alkaline batteries.

3. Press the battery cover

back into place.

Battery Saver

Your remote automatically turns off if the buttons are
depressed more than 30 seconds. This will save your
batteries should your remote get stuck in a place where
the buttons remain depressed (e.g., between the sofa
cushions).

Code Saver

You will have up to 10 minutes to change the batteries
in your remote without losing codes you have
programmed. However, do not press any buttons until
batteries are installed in the remote. If buttons are
pressed without batteries in the remote, all codes will be
lost.

Power-On Default

The remote powers on in TV mode.

Code Setup

The 

CODE SEARCH

 button is used to setup the

remote. You can either setup the remote using the code
for your brand of product, from the code tables (on
separate sheet), or you can search through the library
of codes until you find a code that works for your
product.

Please refer to “Programming with Code Search” on page
8 for more information on using the code search feature
to learn how to search through the library of codes for
your products.

NOTE: You can store any kind of code under any mode
(except TV). I.E. you can store a VCR code under the

CBL 

button, or a DVD code under the 

VCR 

button, etc.

However, you can only store TV codes under the 

TV

button.

Button Functions, cont.

DVD Functions

SCAN+

 and 

SCAN-

 buttons control the speed of Fast

Forward and Reverse Playback respectively.

 and 

CHAPTER-

 buttons respectively

locate the succeeding or preceding Chapters or Tracks
on a disc.

SUBTITLE 

button turns the subtitles on or off.

REPEAT 

button performs DVD players “A-B Repeat” (or

RPT A.B) function for repeat play of current Chapter or
Track.

INFO/SELECT 

button brings up DVD Display or

Control Menu for Chapter/Track/Title number, Time
remaining/elapsed indication, system information, etc.

QUIT 

button is used to Exit or Clear on-screen Menu

displays.

PLAY 

button is used to start Disc playback and for

Menu selection on some DVD players.

STOP 

button stops Disc playback.

PAUSE 

button pauses Disc playback - press 

PLAY 

to

resume.

INPUT 

button activates the DVD Players SETUP Menu.

MENU IN/OUT

The Menu In/Out button allows you to toggle in and out
of Menu Mode. Pressing Menu In/Out brings up your
device Menu. While in Menu mode the remote’s red
indicator light blinks continuously. The remote will exit
Menu Mode after 20 seconds if no keys are pressed.
While Menu Mode is active, the Menu, Channel,
Volume, Mute and Mode keys perform the following
functions:

MENU IN/OUT

 Exits/Enters Menu mode.

CHANNEL UP/DOWN

 Up/Down commands for on-

screen Menu navigation.

VOLUME UP/DOWN

 Right/Left commands for on-

screen Menu navigation.

MUTE OK 

command for on-screen Menu selection.

TV Mode Key

 Quit, Exit or Clear command to quit on-

screen Menu and return the remote to normal operation
(red indicator is now off). Note this action is also
available by pressing any Mode key.