OPERATION
9
GENERAL OPERATION:
1. Connect the supplied AC/DC Adaptor to the unit and wall outlet as previously instructed. The Red
Standby Indicator on the top of unit will illuminate.
2. Press and hold the
STANDBY/SOURCE
Button on the top of unit or press the
Button
on the Remote Control to turn on the unit from standby mode. The color of the indicator will turn to
correspondent color. You will also hear an audible say
“Power on”.
3. Press the
STANDBY/SOURCE
Button on the top of unit or press the
SOURCE
Button on the
Remote Control repeatedly to switch to desired playback mode. The color of the indicator will turn
to correspondent with your selection (see list below):
Playback Mode:
Color of Indicators:
BT (Bluetooth)
Blue (and blinking)
FM Radio
Green
LINE IN
Purple (Red + Blue)
AUX IN
Orange (Red + Green)
4. During playback,
Press the
/Tune -/VOL –
or
/Tune +/VOL +
buttons on the unit or the
VOL +/-
buttons
on the Remote Control to adjust volume level as desired.
Press the
(MUTE)
Button on the Remote Control to turn off the sound temporary, press
again to turn it back.
Press and hold the SOURCE/LED 1 Button on the top of unit to power On/Off all the
Decorative LED Lights.
5. When finished, press and hold
STANDBY/SOURCE
Button on the top of unit or press the
Button the Remote Control to turn the unit to standby mode. The color of the Indicator
will turn to Red.
6. If you will not use the unit for an extended period of time, unplug the AC/DC Adaptor from wall outlet.
STANDBY
/
STANDBY
/
