14
English
P
REPARATIONS
Picture Setup
S-VIDEO
TV SHAPE
Select the aspect ratio of the TV to be connected. If your
DVD is not encoded to allow you to change the aspect
ratio, TV shape cannot be changed.
4:3 PS
(panscan)
Select this if you have a
conventional TV set and your
DVD is not formatted for
widescreen viewing. A wide
picture is displayed on the
whole TV screen with a portion automatically cut off.
4:3 LB
(letterbox)
Select this if you have a
conventional TV set and your DVD
is formatted for widescreen
viewing. Wide bands is displayed
on the upper and lower portions
of the TV screen.
16:9
(widescreen)
Select this if you have a
widescreen TV set (you must
also set your widescreen TV
to “full size”.)
TV SYSTEM
Allows you to select the color system that corresponds to
your TV.
AUTO
Select this if the connected TV is multi system. The
output format will be in accordance with the video signal
of the disc.
NTSC
Select this if the connected TV is NTSC system. It will
change the video signal of a PAL disc and output to
NTSC format.
PAL
Select this if the connected TV is PAL system. It will
change the video signal of an NTSC disc and output to
PAL format.
VIDEO OUT
Set the Video Output according to your video connection.
This setting is not required if you are using the VIDEO OUT
jack (yellow) to connect the DVD system to your TV.
PR PB Y / SCART
Select this if you have connected the DVD system to
your TV using the Component Video Out
(Pr/Cr Pb/Cb Y) jacks.
(SCART - not available for this version)
S-VIDEO
Select this if you have connected the DVD system to
your TV using S-Video jack.
SCR SAVER (Screen Saver)
OFF
Select this to disable the screen saver function.
ON
Select this if you wish to dim the TV screen when the
disc playback is stopped or paused for more than five
minutes. This will prevent your display device from
becoming damaged.
Sound Setup
DIGITAL OUTPUT
Allows you to specify the type of digital output suitable for
the optional audio equipment that connected through the
DIGITAL OUT at the rear of your DVD system.
ALL
Select this if you have connected the digital output
(COAXIAL or OPTICAL) to a multichannel decoder
receiver.
PCM 96K
Select this if the optional audio equipment is capable of
processing digital signal input with sampling rates of 96 kHz.
PCM 48K
Select this if the optional audio equipment is incapable of
processing 96 kHz digital signal input. The signal will then
be converted to a standard signal with sampling rates of
48 kHz.
OFF
Select this to deactivate the digital output (COAXIAL or
OPTICAL.)
