EN
-
43
EN
13. TROUBLESHOOTING
Problem
Tip
No power.
Check the AC power cord, if it is properly connected.
Try another power outlet.
Unplug the AC power cord, and wait for about 5-10 seconds. Plug it back
in and attempt to power On the unit.
No sound or picture.
Make sure both the TV and Blu-ray™ Home Cinema are Turned On.
Confirm the connections to the TV are made properly as shown in the
“CONNECTIONS” on page 10.
Check to see whether the connected TV or another device supports
HDCP. (This unit will not output a video signal unless the other device
supports HDCP.)
No reaction to the remote control.
Reduce the distance to infrared sensor window.
Confirm that the player’s AC power cord is plugged into a powered outlet.
Check the batteries in the remote control and make sure they are inserted
properly by + or - symbols.
Aim the remote at the unit’s remote receiver. Then press any arrow key
and confirm the Power-On indicator dims and blinks when a remote button
is pushed. Please check IR signal. Refer to “IR Signal Check” on page 48.
No Audio / Video signal on the display device
via HDMI cable.
If the unit is connected to a non-certified HDMI device, the Audio / Video
signal will not output to that device.
Make sure the display device is on the correct Input / Video source.
Perform the HDMI hotplug: Disconnecting the HDMI cable from the display
device, Turn On both devices, and replug the HDMI cable back in.
Check with the TV manufacturer, if there are any software updates
available for the TV.
Check to see if the HDMI cable is a certified version.
No high-definition video signal on the TV
screen.
Does the disc contain high-definition video? High-definition video is only
available when the disc contains it.
Does the TV support high-definition video? High-definition video is only
available when the TV supports it.
Distorted picture.
Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Connect this unit directly to the TV. If Audio / Video cables are connected
to a VCR, pictures may be distorted due to the VCR copyright protection
system.
Completely distorted picture or black / white
picture with Blu-ray Disc™ / DVD.
Make sure the disc is compatible with this unit.
No sound or distorted sound.
Adjust the volume.
Check to see if the speakers are connected correctly.
Check the HDMI, COAXIAL and AUX connections as necessary.
Make sure the HDMI cable is not plugged into an HDMI-DVI adapter or
Projector which does not handle Digital sound.
Check the settings in “Audio
¬
Out” menu.
Picture freezes momentarily during disc
playback.
Check the disc for fingerprints / scratches and clean with a soft cloth wiping
from the center to the outer edge.
continued on next page
