background image

– 17 –

EN

0C28

V-CHIP SET UP

V-CHIP enables parents to prevent their children
from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except
for news and sports programs, unedited movies on
premium cable channels, and Emergency Broadcast
System signals), then denies access to programming
if the program’s rating meets the limitations you
select. In this case, “PROTECTED PROGRAM by
...” message appears on the TV screen. 
To block ratings, follow the steps below.

Programming may be rated by the Motion Picture
Association of America (MPAA) or according to
the Television Parental Guidelines. In order to
block any inappropriate programming, set your
limits in both places (MPAA RATING and TV
RATING).

TV RATING SET UP

Make sure ...

TV/DVD power must be turned on.

1

Select “V-CHIP SET UP”

Press SETUP on the remote control.
Press Arrow (

K

/

L

) to point to “V-

CHIP SET UP”.
Then press ENTER.

2

Input Access code

Press the number buttons to enter 4-
digit access code. The default code
is 0000. 

3

Select “TV RATING”

Press Arrow (

K

/

L

) to point to “TV

RATING”.
Then press ENTER.

4

Select your desired item

Press Arrow (

K

/

L

) to point to your

desired item.
Then press ENTER to select
[BLOCK] or [VIEW].

TV

Selection

Rating Category Explanations

TV-Y

Appropriate for all children

TV-Y7

Appropriate for children seven and older

TV-G

General Audience

TV-PG

Parental Guidance suggested.

TV-14

Unsuitable for children under 14

TV-MA

Mature audience only

When you select a rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn
[VIEW] automatically.

When you turn “TV-Y” to [VIEW], all ratings will
turn to [VIEW] automatically.

- TV SETUP -

CHANNEL SET UP

B

V-CHIP SET UP
LANGUAGE  [ENGLISH]
CAPTION  [OFF]

ACCESS CODE

_  _  _  _

B

TV–Y

[VIEW]

TV–Y7 (

)

[VIEW]

TV–G

[VIEW]

TV–PG (

)

[VIEW]

TV–14 (

)

[VIEW]

TV–MA (

)

[VIEW]

– V-CHIP SET UP –

B

TV RATING
MPAA RATING
CHANGE CODE

When you select TV-Y7, TV-PG, TV-14 or TV-MA
and you press ENTER, the sub-ratings will appear
on the TV screen.
If you select the rating category (example: TV-PG)
and turn it [BLOCK] or [VIEW], the sub-ratings
(example: V for Violence) will turn [BLOCK] or
[VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW]
individually when the rating category is set to
[BLOCK].
To set the sub-ratings individually, follow the steps
below.

When you select [TV-Y7]:

Press Arrow (

K

/

L

) to select

“FV” (Fantasy Violence). 
Then press ENTER to select
[BLOCK] or [VIEW].

When you select [TV-PG], [TV-14] or [TV-MA]:

Press Arrow (

K

/

L

) to select

“D”(Suggestive Dialog),
“L”(Coarse Language),
“S”(Sexual Situation), or
“V”(Violence). Then press
ENTER to select [BLOCK] or [VIEW].

NOTE:

When you select [TV-MA], “D” does not

appear on the TV screen.

The sub-ratings which set to
[BLOCK] appears next to the rat-
ing category in the TV RATING
menu.

5

Exit the V-Chip setting mode

Press SETUP on the remote control to return to orig-
inal mode.

TV–Y7

[BLOCK]

B

FV

[BLOCK]

TV–PG

[BLOCK]

B

D

[BLOCK]

L

[BLOCK]

S

[BLOCK]

V

[BLOCK]

B

TV–Y

[VIEW]

TV–Y7 (

)

[VIEW]

TV–G

[VIEW]

TV–PG (DLSV )

[BLOCK]

TV–14 (DLSV )

[BLOCK]

TV–MA (   LSV )

[BLOCK]

Summary of Contents for MSD520FE









































Reviews: