23
EN
23
EN
Recording
Playback
Editing
Introduction
Connections
Basic
Setup
Function
Setup
Others
Español
Note
• Your setting will be canceled if you press [MENU]
before pressing [OK] at step 4.
• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds when you set the clock manually.
• For setting the day, year, hour, and minute,
[the Number buttons] can also be used.
• You can set the built-in calendar from the year 2010
up to 2060.
SETTING THE CLOCK
Set the clock before you try the timer programming. Follow these steps below.
1
Press [MENU] and use [
K
/
L
] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
2
Use [
K
/
L
] to select “Clock”, then
press [OK].
“Clock Setting” menu will appear.
3
Use [
K
/
L
] to select calendar or time,
then press [OK].
Clock Setting
JAN / 01 / 2011 ( SAT )
12 : 00 AM
4
Use [
{
/
B
] to select an item to set,
and use [
K
/
L
] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
Clock Setting
JAN / 01 / 2011 ( SAT )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press [OK].
5
Press [MENU] to exit.
