32
EN
32
EN
SATELLITE LINK
You can set the unit to start recording whenever it detects the video signal from the external tuner.
Preparing for the satellite link timer recording:
Preparation on the tuner
• Satellite link accepts only the connection from L1 (rear) with the external tuner. (The connection from L2 cannot read
any signals from the external tuner.)
• The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to
output audio/video signals when it comes to the time you want to start recording, and stop output audio/video
signals when it comes to the time you want to finish recording. Refer to the tuner’s manual on how to set the timer.
• Make sure to set the satellite link standby mode when you finish setting.
1
Press [MENU].
2
Use [
K
/
L
] to select “Timer
Programming”, then press [OK].
3
Use [
K
/
L
] to select “Satellite Link”,
then press [OK].
Timer Programming
Satellite Link
Timer Programming
4
Use [
K
/
L
] to select the time and
recording mode, then press [OK].
Satellite Link
Start Mode
5:00PM SP (2Hr)
To Standby Mode
5
Use [
K
/
L
] to set the desired starting
time, then press [
B
].
• The hour can be selected from 1 to 12 with AM
or PM.
• Repeat procedures in step 5 to set the desired
minutes.
• If you wish to go back to the left, press [
{
].
6
Use [
K
/
L
] to select the recording
mode.
Refer to page 24 for details.
