background image

84

EN

84

EN

VCR FUNCTIONS

One-touch Timer Recording (OTR)

Index Search

This feature allows you to set the recording length simply 
by pressing 

[REC]

 on the remote control.

Press [VCR] first.

1) Insert a recordable tape with an erase-protection 

tab intact.

2) Select the recording mode using [REC MODE].

(Refer to “Note for DVD to VCR duplication” on page 42 
and “Recording” on page 83.)

3) Press [SOURCE] to select the appropriate external 

input position (L1/L2) to which your external tuner 
is connected.

4) Press [REC] to begin the one-touch timer recording.

You can select a fixed recording time by pressing 

[REC]

 repeatedly.

(0:30)

(1:00)

(Normal recording)

(7:30)

(8:00)

When the one-touch timer recording is finished, the 
unit will turn to the standby mode automatically.

  To change the recording length during the one-

touch timer recording:

Press 

[REC]

 repeatedly until the desired length appear.

  To cancel the one-touch timer recording within the 

specified time:

Press 

[STOP 

C

]

.

Note

•  The remaining recording time will be displayed on the 

front panel display during one-touch timer recording. 
Press 

[DISPLAY]

 to see it on the TV screen.

• You cannot pause the one-touch timer recording.

•  If VCR one-touch timer recording is completed during 

DVD playback or recording, the VCR will be in stop 
mode and the DVD keeps the current mode.

•  Unlike a timer recording, you can perform the following 

operations during the one-touch timer recording.

  -  Turning the power to the standby mode to stop one-

touch timer recording.

 - Using 

[REC]

 or 

[STOP 

C

on the remote control.

•  When the one-touch timer recording is finished and the 

power is in the standby mode, the unit will switch to 
the timer standby mode automatically if a timer 
recording has been programmed. Press 

[TIMER SET]

 to 

cancel the timer standby mode for using the unit 
continuously.

•  This function is available only when the unit is 

connected by the VIDEO OUT jack.

An index mark will be assigned at the beginning of each 
recording you make. You may skip to a specific marked 
point by following the steps below.

Press [VCR] first.

1) Press [SEARCH] so that “INDEX SEARCH” menu 

appears.

2) Using [the Number buttons], enter the number of 

recordings you wish to skip within 30 seconds.

 

 INDEX SEARCH
         03

3) Press  [

E

], [

D

] to start index search.

If you want to go in the forward direction, press 

[

D

]

.

If you want to go in the reverse direction, press 

[

E

]

.

After index search, the VCR will play back the cassette 
tape automatically.

Pro.1

Pro.2

Pro.3

Pro.4

Pro.5

02

01

01

02

03

Beginning 
of tape

End 
of tape

CURRENT PROGRAM

INDEX MARK

Note

•  You can make the index mark up to 20.
•  This function is available only when the unit is 

connected by the VIDEO OUT jack.

E9P8BUD_ZV427MG9_v1.indd   84

2009/01/27   17:09:35

Summary of Contents for ZV427MG9 A



































































































Reviews: