background image

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship 
as follows:

DURATION:

PARTS:

   FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date 

of original retail purchase. Certain parts are excluded from this warranty.

LABOR:

   FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of 

original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER 
PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE 
UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing 
or if service was attempted by an unauthorized service center. This limited warranty does not apply to any 
product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occur during normal use. It 
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products 
not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, 
misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or 
office use of this product, or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY 
COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT 
OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS 
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL 
OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS 
REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.

THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF 
OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM 
STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION 
WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT 
PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original 
packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI 
CORP. will not reimburse you for any service done by unauthorized service providers without prior written 
approval. 

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please 
contact us at:

FUNAI SERVICE CORPORATION

Customer Service

Tel: 1-800-605-8610

http://www.magnavox.com/support

2200 Spiegel Drive, Groveport, OH 43125

Printed in China 

E9P8BUD

1VMN27077 

★★★★★

E9P8BUD_ZV427MG9_v1.indd   98

2009/01/27   17:09:48

Summary of Contents for ZV427MG9 A



































































































Reviews: