31
EN
31
EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
TUNER SETTINGS
Switching Analog Mode /
Digital Mode
You can easily switch the analog TV (NTSC) and digital TV
(ATSC) with the remote control.
Press [DTV/TV] on the remote control.
• The analog mode and digital mode switch alternately.
Note
• When you switch the analog mode to the digital
mode, it may take about 10 seconds until the digital
channel selection is completed. The following screen
is displayed while switching the mode.
Now Scanning
DTV 125. 1
Channel Selection
<Digital TV Channels>
Enter the major and minor channel number with
[the
Number buttons]
to select a channel you want to watch.
For 1-digit number
e.g.) 2-2 ch:
major channel
[0]
+
[2]
or
[2]
+
[•]
minor channel
[0]
+
[2]
,
[2]
+
[•]
or
[2
] + leave it for 2 seconds.
For 2-digit number
e.g.) 35-16ch:
major channel
[3]
+
[5]
minor channel
[1]
+
[6]
• If you enter 1 digit for major channel and leave it for 2
seconds, the number will be taken as the major channel
and lowest minor channel of the major channel will be
displayed.
• If there is no minor channel input, lowest minor channel
of the major channel will be displayed.
Note
• It may take up to 5 to 7 seconds to switch the digital
TV channels.
• In digital TV broadcasting, 2 or more channels, called
minor channels, are simultaneously broadcast on one
main channel, called major channel.
About digital TV broadcasting:
With its high definition broadcast, digital broadcasting far
surpasses analog broadcasting in both its picture and
sound quality.
What is the minor channel?
By using high compression technology, digital
broadcasting offers a service that enables multiple signals
to send simultaneously.
Therefore, you can select more than one program per
major channel since digital broadcasting technology
distinguishes between multiple channels broadcast by a
signal network.
: change automatically
: change manually by using
[CHANNEL / ]
CH4-1
18:00
18:30
19:00
19:30
20:00
CH4-2
CH4-1
CH4-1
CH4-3
smallest
CH
smallest
CH
CH4-3
CH4
CH4-2
CH4-1
smallest
CH
smallest
CH
ATSC (digital mode)
NTSC (analog mode)
[Air Time]
major channel minor channel
Select channels by using
[CHANNEL / ]
or
[the
Number buttons]
found on remote control.
[CHANNEL / ]
Use
[CHANNEL / ]
to change the channel.
[the Number buttons]
Press the channel number with
[the Number buttons]
to
select a channel you want to watch.
<Analog TV Channels>
Enter the channel number with
[the Number buttons]
to
select a channel you want to watch.
For 1-digit number
e.g.) 2 ch:
[0]
+
[2]
,
[2]
+
[•]
or
[2]
+ leave it for 2 seconds.
For 2-digit number
e.g.) 12ch:
[1]
+
[2]
E9H80UD.indd 31
E9H80UD.indd 31
2007/03/28 9:56:12
2007/03/28 9:56:12
