43
EN
43
EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
How to select a channel number for the timer recording
Analog TV
For channel number 2-6 press, press
[
B
]
or
[ • ]
to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV
For channel number 1-12 press, press
[
B
]
or
[ • ]
to decide the channels. For other channels (13-
125), the channel will be decided as soon as you enter the channel number.
Digital TV
For channel number 1-9 press, press
[
B
]
or
[ • ]
to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV
For channel number 1-13 press, press
[
B
]
or
[ • ]
to decide the channels. For other channels (14-
135), the channel will be decided as soon as you enter the channel number.
minor channels
For channel number 1-9 press, press
[
B
]
or
[ • ]
to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number.
e.g.) “5”:
[0]
+
[5]
• For selecting the channels with
[
K
/
L
]
you need to press
[
B
]
or
[ • ]
to decide the channel number.
• For selecting the minor channels with
[
K
/
L
]
, please make sure the minor channel your are selecting is existed.
[
K
/
L
]
does not skip the non-existed minor channels.
TIMER RECORDING
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [TIMER SET].
2) Press [TIMER].
3) Check the information.
Timer Programming
MON JAN/01 11:00AM
SP (1:00)
JAN/ 2/07 12:00 AM 125.1 SP
Date
Start
End
CH
JAN/02 12:00AM 1:00AM DTV125.
1
New
Program
4-A) To delete the timer program:
1 Use [
K
/
L
] to select the program you want to
delete, then press [OK].
2 Use [
K
/
L
] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [
K
/
L
] to select “Yes”, then press [OK].
4-B) To correct the timer program:
1 Use [
K
/
L
] to select the program you want to
correct, then press [OK].
2 Use [
K
/
L
] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[
K
/
L
/
{
/
B
], then press [OK].
5) Press [TIMER] to exit.
6) Press [TIMER SET] to return to the timer standby
mode.
Note
• Press
[TIMER]
to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
Timer Programming
1/1
TUE JAN/02 11:00AM
Date
Start
End
CH
E41
JAN/02
12:00AM 1:00AM DTV125. 1
New
Program
Each error number means:
E1-22
E37-39
Recording error other
than below
E41
Power failed
E24
Unrecordable disc
E42
No disc when
recording
E25-26 Copy prohibited
program
E43
Already 49 titles
recorded
E29
Disc protected
E44
Already 254 chapters
recorded
E30
Disc full
E45
Copy prohibited
program
E35
PCA full *1
E46
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
E36
Already finalized
video format disc
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the start time.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
Press [STOP
C
] / [STOP/EJECT
C
A
]
on the front panel
of the unit
to stop the timer recording in progress.
[STOP
C
] on the remote control is not effective.
To stop the timer recording in progress
E9H80UD.indd 43
E9H80UD.indd 43
2007/03/28 9:56:17
2007/03/28 9:56:17
