87
EN
87
EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
SETUPS
1
OSD Language (Default : English)
Set the language for the on-screen display.
Use [
K
/
L
] to select a setting, then press [OK].
OSD Language
English
Français
Español
Your setting will be activated.
2
Screen Saver (Default : 10 minutes)
Set the time to activate the screen saver function on the
TV screen.
Use [
K
/
L
] to select a setting, then press [OK].
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
Your setting will be activated.
3
FL Dimmer (Default: Bright)
Set the front panel display brightness.
Use [
K
/
L
] to select a setting, then press [OK].
FL Dimmer
Auto
Bright
Dark
You can choose one from “Auto”, “Bright” and “Dark”.
If “Auto” is selected, the display gets dark when the
power is off.
5
V-Chip
You can set the viewing limitation for the digital TV
programs to prevent your children from watching
inappropriate programs.
This feature is available only after the digital TV
ratings
have been downloaded
• The ratings can be downloaded by the unit
automatically if it is available in your area.
1) Use [the Number buttons] to enter the access
password.
If you have not set the password, first, use
[the Number
buttons]
to set the access password, then press
[OK]
.
The number you entered will be stored as the access
password.
Password Input
2) Use [
K
/
L
] to select a desired item, then press [OK].
V-Chip
Downloadable Rating
Change Password
A
B
A
Downloadable Rating
Set the rating system via digital broadcasting, or clear the
downloaded ratings.
If the broadcasting signal does not have the
downloadable rating information, the message below
will appear.
Downloadable Rating is currently not available.
•
This message will also appear when you try to access
“DOWNLOADABLE RATING“ after you have cleared the
downloadable rating information, and the new information has
not been downloaded since.
To set the rating:
Use
[
K
/
L
]
to select “BLOCK SETTING” then press
[OK]
to show the various types of ratings. Use
[
K
/
L
]
to
select a desired rating to set, then press
[OK]
to show
the levels for the rating. Use
[
K
/
L
]
to select a level,
then press
[OK]
to switch “VIEW” or “BLOCK”. If you set
one level to “BLOCK”, all the higher levels will be turned
to “BLOCK” automatically.
To clear the downloadable rating information and its
setting:
Use
[
K
/
L
]
to select “CLEAR DOWNLOADABLE
RATING”, then press
[OK]
.
B
Change Password
Change the current password.
Use [the Number Buttons] to enter new access
password.
Note
• When you forget the access password at step 1),
enter 4,7,3,7 using
[the Number buttons]
in the
password input window. Password will be cleared.
• Depending on the type of rating system, you may set
the levels individually.
Display (cont’d)
E9H80UD.indd 87
E9H80UD.indd 87
2007/03/28 9:56:37
2007/03/28 9:56:37
